|
|
Build Your Online Product Catalogs?
| Product Name: |
Threadlocking adhesive JH272£¬Loctite 272 quality
|
| Supply Ability: |
100 tons |
| Related proudcts |
loctite 272 quality, threadlocker, |
| Specifications |
JH272 |
| Price Term: |
FOB |
| Port of loading: |
Qingdao |
| Minimum Order |
10 pieces |
| Unit Price: |
1.95$ |
|
JH272 Threadlocking adhesive
High temperature¡ê|high strength
Withstands temperatures up to 230oC.
For locking and sealing the thread of cylinder without being cleaned.
Provides a fast cure on most surfaces, including s received asteners.
Recommended for bolJH up to M36. Heating and hand tools required for disassemble.
Typical properties of cured material
Initial cure speed
With activator/without activator 5min/15min
Full cure speed 24 h
Gap fill 0.25 mm
Temperature range -54~150℃
Coefficient of heat expansion ASTMD696£¬K-1 80 ¡Á10-6
Coefficient of heat conductivity ASTMC177£¬W&©|8226;m-1£®K-1 0.1
M10 steel nut and bolt cured at 22℃ 24 h
Break torque ISO-10964£¨N&©|8226;m£© 18~25
Prevail torque ISO-10964£¨N&©|8226;m£© 20~30
Directions for use:
For Assembly
1. For best results, please clean all surfaces(external and internal) with a cleaning solvent JH755 and allow to dry.
2. If the material is an inactive metal or the cure speed is too slow, spray all threads with a activator JH7649 and allow to dry.
3. Shake the product thoroughly before use.
4. To prevent the product from clogging the nozzle,do not allow the tip to touch metal surface during application.
5. For the Thru Holes, apply several drops of the product onto the bolt at the nut engagement area.
6. For the Blind Holes, apply several drops of the products down the internal threads to the bottom of the hole.
7. For Sealing Applications, apply a 360 bead of product to the leading threads of the male fitting, leaving the first thread free. Force the material into the threads to thoroughly fill the voids. For the materials into the threads to thoroughly fill the voids. For bigger threads and voids, adjust product amount accordingly and apply a 360 bead of product on the female threads also.
8. Appl |
| Company: |
Yantai Jinhui Fine Chemical industry Co.,ltd
|
| Contact: |
Ms. Betty Zhao |
| Address: |
No. 2, Zhoushan Road |
| Postcode: |
264006 |
| Tel: |
86 0535 6382478 |
| Fax: |
86 0535 6382479 |
| E-mail: |
|
|
|
|
Home
